bbr Bänder Bleche Rohre

Josef Schiller, owner of a forge and metal construction company in Upper Bavaria, invested in his own cutting system for the first time. Since its launch in March 2022, it has benefited from the PL Compact 2D plasma cutting system. "The plant runs almost every day and is really efficient. For us, it's a perfect fit." © MicroStep Europe

Cutting in the house

30. September 2022 Hans Georg Schätzl

For many years, the blacksmith and metal construction company Josef Schiller in Gmund am Tegernsee was looking for a compact fine plasma cutting system to be able to implement the […]

The compact Flexible Manufacturing System PSBB integrates the processes of punching, shearing, buffering and bending in a single solution. © Prima Power

More automation, more efficiency

29. September 2022 Hans Georg Schätzl

Prima Power’s presence is fully in line with the motto of the 26th EuroBLECH “Your gateway to a smarter future”. Prima Power invites all visitors to take a “journey into […]

Construction and tool steel specialist JKZ Bučovice relies on two fully automatic Kastobbs A 3x20 log band saws to process large and heavy workpieces. © Kasto

Precise machining of large workpieces

28. September 2022 Hans Georg Schätzl

Anyone who wants to cut rolled ingots and plates precisely and reliably to the desired length needs the right sawing technology – and so does the construction and tool steel […]

"Green Steel" is to become a signaling device for the entire economy. For SSG, this starts with accurate documentation and the continuous reduction of its own footprint.

White paper on decarbonization of the steel industry

27. September 2022 Hans Georg Schätzl

Without the transformation of the steel industry to “Green Steel”, the rapid climate change will be unstoppable. The electric steel producer Swiss Steel has already taken decisive steps in the […]

The new cordless drill/driver from Metabo are extremely powerful and therefore the perfect machines for locksmiths and metalworkers. The BS 18 LTX-3 BL Q I Metal, for example, manages thread cutting up to M16 and drilling up to 20 millimeters in diameter in metal. © Metabo

With its new cordless drill and impact drill range, the Nürtingen-based power tool manufacturer Metabo focuses on maximum performance for working in metal. With their 3-speed shifting, the brushless 18-volt […]

New Bihler LM 2000-KT linear machine for efficient production of stamped and bent parts from strip material in medium and high batch sizes. © Bihler

New dimensions of standardization

26. September 2022 Hans Georg Schätzl

Bihler will be presenting the two LM 2000-KT and LM 2000-NC linear machines for the first time at EuroBlech. The highly standardized machine platforms offer new manufacturing dimensions with uniform, […]

Roemheld will be presenting an integrated concept for handling and changing forming and punching tools at Euroblech 2022. It allows tools to be stored easily, quickly and safely, transported to the machine and positioned and clamped there quickly and reliably. © Roemheld

New pull-push system facilitates mold change

23. September 2022 Hans Georg Schätzl

Tight cycle times, maximum efficiency: where forming presses and punches are at work, the entire process chain is trimmed for maximum output. But with decreasing batch sizes, the number of […]

The Graebener GRF 55 circular seam milling machine for offshore production is mobile and can be positioned directly at the pipe section by means of a crane or forklift truck. Thanks to its power output of 55 kilowatts, it achieves milling depths of up to 150 millimeters. © Ingersoll

Fresh wind thanks to offshore

22. September 2022 Hans Georg Schätzl

Graebener developed its first milling systems for the preparation of weld seams on pressure vessels back in the 1980s, initially only for use in what was then its own large-diameter […]

At the 143 sqm booth in Hall 13 - F58, international trade visitors will get an insight into the entire product range of TEKA systems. © Teka

Sustainable, digital, individual

21. September 2022 Hans Georg Schätzl

“At the international marketplace for sheet metal working, we will be showcasing the latest technology standards for customer-specific solutions with the highest quality,” claims Simon Telöken, Teka Managing Director, for […]

"We are now establishing AP&T Furnaces as a separate business unit to increase the potential for developing future solutions," explains Pär Mickos, the Product Manager Furnace Systems at AP&T. © AP&T

Furnaces – an area with great potential

20. September 2022 Hans Georg Schätzl

“Our furnace systems meet the automotive industry’s growing need for solutions that make production more efficient and vehicles lighter, safer and more energy-efficient. We are now establishing AP&T Furnaces as […]

Month: September 2022