bbr Bänder Bleche Rohre

Company

Schuler Industry Division under new management

7. February 2024 Hans Georg Schätzl

Hessdorf site manager Benjamin Fürst takes over from Frank Klingemann. Torsten Petrick becomes location manager in Weingarten. Schuler Managing Director Frank Klingemann is stepping down as head of the Industry […]

Sheet Metal Coils

“As if from a single mold”

21. June 2023 Hans Georg Schätzl

The 10,000 kilonewton Schuler servo press for automotive supplier Wöhrle offers numerous innovative extras. A coil width of up to 1,300 millimeters with zigzag feed and residual strip processing, a […]

More quality, less scrap

6. June 2023 Hans Georg Schätzl

In the “Smart Press Shop”, Amepa recently commissioned two online measuring systems for determining roughness and oil film thickness on strip surfaces. They provide precise inline data on two parameters […]

Significantly reduced power consumption

21. November 2022 Hans Georg Schätzl

By linking it to real production data, Schuler’s “Energy Monitor” enables savings of ten percent and more. Electricity prices currently know only one direction: upward, and in steep flight. So […]

No more defective parts in the box: "Visual Quality Inspection" (VQI) from Schuler makes exactly that possible. © Schuler

Immediately detect rejects

22. August 2022 Hans Georg Schätzl

The job is done, the last box is filled. But a quick glance reveals that all parts have a scratch on important functional surfaces – a criterion for exclusion for […]

The new press will produce steel panels for the Mini plant in Oxford. © BMW

BMW Group opens new automated steel pressing facility at Swindon plant

14. July 2022 Hans Georg Schätzl

BMW Group board member for production, Dr Milan Nedeljković, formally opened a new automated steel pressing facility at the company’s Swindon plant. The new press will produce steel panels for […]

Company

Workforce and employer help together

20. May 2022 Hans Georg Schätzl

The dramatic fate of the people in Ukraine has triggered a wave of willingness to help among Schuler’s workforce in Germany. Barely four weeks after the company’s first appeal for […]

Company

Happy Birthday, Farina!

6. May 2022 Hans Georg Schätzl

In 1932 Domenico Farina founded his company “Costruzioni Meccaniche Farina”, a workshop for the production of stamping tools. However, in order to test them, a press was needed – and […]

In TwinServo presses, the drives can be controlled asymmetrically to avoid slide skew. © Schuler

TwinServo press plays out its advantages

25. April 2022 Hans Georg Schätzl

Active tilting compensation increases the precision of the formed parts and extends the service life of the tools. In transfer presses, the forming of parts in stages usually causes the […]

Sheet Metal Coils

VDP Analyzer reveals causes of errors

8. March 2022 Hans Georg Schätzl

In 2019, Schuler developed a camera-based die monitoring system for presses under the name “Visual Die Protection” (VDP). The system is part of the “Digital Suite” in which Schuler has […]