bbr Bänder Bleche Rohre

Stamping Practice

29. April 2022 Hans Georg Schätzl

The manufacturing process high performance stamping and Bruderer, according to the self-assessment, are one. This is illustrated in the technical book “Stamping Technology”, which has been an important tool for […]

Networking and digitization are also becoming increasingly important in manual welding technology. © Cloos

Modular platform concept

28. April 2022 Hans Georg Schätzl

Whether manual or automated welding, thin- or thick-walled materials, use in a production hall or on a construction site – the configuration options of the Quineo welding power sources from […]

The decisive criterion for Ferro in choosing the laser cutting system was the possibility of 3D cutting. The new laser rotator can be used to apply simple V and X seams, as well as complex Y or K seams with a bar pattern to different materials. A Highyag Bimo FSC was integrated as the laser cutting head. © Ferro Service Sp z o.o

Sought and found

27. April 2022 Hans Georg Schätzl

The company Ferro Service Sp z o.o in Gubin (Poland) was launched in 2020: its core service is the series production of laser parts with and without chamfer. For this […]

AutoForm-TubeBend is software for rapid design and simulation of tube bending, forming and tube end forming processes © Autoform

Software solution for the successful design and simulation of pipe parts

26. April 2022 Hans Georg Schätzl

AutoForm Engineering, a leading supplier of software solutions for sheet metal forming and body-in-white processes, introduces its advanced software solution for tube parts. In addition to the new features in […]

In TwinServo presses, the drives can be controlled asymmetrically to avoid slide skew. © Schuler

TwinServo press plays out its advantages

25. April 2022 Hans Georg Schätzl

Active tilting compensation increases the precision of the formed parts and extends the service life of the tools. In transfer presses, the forming of parts in stages usually causes the […]

This is how "green" hydrogen is produced. © Steag

Green hydrogen to decarbonize the steel industry

22. April 2022 Hans Georg Schätzl

The operation of the first direct reduction plant using “green” hydrogen is an important milestone on thyssenkrupp Steel’s transformation path. HydrOxy Walsum, Steag’s hydrogen project in Duisburg, North Rhine-Westphalia, is […]

For the high-performance straightening machine, Georg has supplied three straightening cassettes adapted to the properties of the different materials. © George

New cut-to-length line boosts performance

21. April 2022 Hans Georg Schätzl

Heinrich Georg Maschinenfabrik recently commissioned a hybrid cut-to-length line with trimming shear for aluminum, stainless steel and steel sheets at the Alfun “Metal Service Center” in Bruntál, Czech Republic. With […]

The RST 28 features patented kinematics and can reduce non-productive time during bending by 70 percent. © Wafios

“Future Forming Technology”

20. April 2022 Hans Georg Schätzl

The focus of Wafios’ dual trade show appearance at Tube and Wire will be on forward-looking high-speed technologies that enable leaps in manufacturing productivity, as well as “revolutionary” production processes […]

Company

Reduced personnel bottleneck

19. April 2022 Hans Georg Schätzl

Solution in times of shortage of skilled workers in parts cleaning: Portal handling takes over automated loading and unloading. Parts cleaning has become an increasing focus of operations in the […]

Trumpf's Oseon software offers innovative functions for material flow, such as a transport guidance system for employees. © Trumpf - Karlsruhe Institute of Technology

More productivity in networked manufacturing

14. April 2022 Hans Georg Schätzl

With the Oseon software, users can fully automate the material flow in their production without connecting a large warehouse. Production employees receive all relevant information on the manufacturing process as […]